FRAMEGRABBER
Autonomous Operation
of Vehicle Cameras
A Framegrabber is the device of choice whenever the autonomous testing of automotive video cameras is the main concern. The respective camera is simply connected to the Framegrabber via a standard automotive video cable and can then be operated directly on the PC via USB 3.0 without additional devices or drivers. It does not matter whether an RGB, YUV or RAW camera is used.
TZ Framegrabbers are series-produced for the generally used GMSL and FPD-LINK technology standards and are available with a variety of connectors such as FAKRA or Rosenberger HSD.
We will be pleased to realize other technologies and connectors individually for you on request.
All our Framegrabbers allow true plug and play: Up to 100 customer-specific configurations for different camera types and test settings can be stored in the device and selected via rotary switch. When the camera corresponding to the selected setting is connected, it is automatically initialized and can be immediately used to the full extent.
scroll
Applications
- Laboratory tests and measurements of parameters such as contrast, picture detail and dynamic range, etc.
- Hardware and software development with the camera directly at the workstation
- Calibration of camera lenses
- Verification of specifications according to the vehicle manufacturer
- Environmental tests (resistance/function at heat shock, cold, UV radiation, etc.)
- Hardware-in-the-loop tests (long-term tests)
- End-of-line tests
- Test and trial runs
Functions
Our Framegrabbers offer a simple and fast way of visualizing and recording video signals from a vehicle camera on a PC. At the same time, they have many practical additional functions and numerous connection options for further test tools.
Power over Coax
The Framegrabber can provide the required voltage for cameras where power is supplied via the automotive video cable.
Settings Selector
A rotary switch can be used to switch between different configurations for different cameras. Up to 100 customer-specific configurations can be stored and updated or replaced with new ones as required.
Remote Control
Remote switching of the settings is also possible via the USB port, e.g. for automated end-of-line tests with different cameras.
Control Channel Master
Registry entries can also be read and set during operation via the built-in USB Control Channel Master. As a result, no additional tools are required for this task.
Camera Initialization
The complete initialization (serializer and imager) for a camera can be stored in the internal memory in one setting. This allows direct plug and play – even for cameras without an ISP (Integrated Signal Processor).
Color Spaces
Our Framegrabbers can process all standard color spaces, so it makes no difference whether the connected camera is an RGB, YUV or RAW camera.
TZ Viewer
Our Framegrabbers include TZ Viewer, a practical software which enables video streams to be quickly and easily processed and displayed, snapshots to be created or videos to be saved.
TZ GUI Software
Für alle unsere aktuellen Produkte steht Ihnen mit unserer TZ GUI eine leistungsfähige und benutzerfreundliche Software zur Verfügung, die eine einfache und schnelle Konfiguration für neue Komponenten und Testaufgaben erlaubt. Wir erstellen und hinterlegen die optimalen Settings für Ihr Gerät. Dadurch erwartet sie ein echtes Plug-and-play, und Sie sparen Zeit und können sofort mit der Arbeit starten.
Status LEDs
Status LEDs for the most important functions indicate the respective operating status and allow quick identification of possible error sources.
Extensive Interfaces
Additional external sockets can be used to connect further tools and test devices, e.g. to read out the configuration of the imager via the I2C interface.
Product Overview
Scope of Supply
All our test devices are supplied pre-configured and ready for use including all components necessary for operation, such as power supply, cables and plugs, etc.